software for TI Calculators
I have received
many e-mail regarding the link software, and I have not
answered to a large number of them. If you sent me an
e-mail and did not receive any response, then please
accept my appologies and send it again. If you have any
problems then please send an email to the list. Be sure also to read the list archive before posting.
Check this new page for Modifying the
TI-GraphLink program to support the Parallel Link.
can be downloaded now. FLASH programs and ROM updates are
supported in this version.
In version 4.1,
flash support has been tested on the TI89 and is working
properly. However, if you are having problems with it,
the other solutions to make flash transfers are:
with homemade serial link.
- Modified TI-GraphLink with homemade
- Use the
excellent VTI Emulator under Windows
9x/ME only ( not NT/2000 ), which supports
linking using any cable. Use the ROM from TI and
make the emulated calculator send the ROM to your
- Tran8 v2.0
This is a simple DOS program to send and recieve
datato the TI82 or the TI83 or the TI85 using a
parallel or a serial or a Graphlink. For more on
how to build the link see AndreasWestfeld
This is a Windows 3.1 version
that works with TI82,TI83, TI85,TI86, TI89 and
TI92+ for parallel or serial link. Works also
under Windows 9x.
Now with a
new interface and many bug fixes.
This is a Windows 9x/ME/NT/2000
version of WTran8x. It supports the Parallel and
Serial link, and works with the TI82, TI83, TI85,
TI86, TI89 and the TI92(+).
version has Flash support and also limited
support for the PIXpander.
To use the program you have to download and
install DriverLINX from SST: port95nt.exe.
- W32Tran8x version
This is the old version of W32Tran8x. It can be
still downloaded because has a drag-and-drop
feature that is not in the new versions.
To use the
program you have to download and install
DriverLINX from SST:port95nt.exe.
simple DOS program for sending variables and
programs to the TI89.